CAPABILITIES
Board Quantities
Prototype and high production quantities
Scheduled low and high volume production for J.I.T.
Approvals
- Commercial manufactured to IPC standards.
- UL 94V-0, Code 2, No. E92841. (to .004″ min. lines).
- Military, MIL-P 55110
- GF, GI, CE Type 1, 2 and 3 with etchback.
- NASA NHB5300.4 requirements for printed wiring boards.
- MIL-I-45208 Quality System.
- ITAR Registered.
- ISO 9001:2015 Cert.# AGS-US041009-2/10
Materials
- All Laminates and Prepreg certified per MIL-S-13949
- FR4 GF (including Tetrafunctional and Multifunctional)
- BT/Epoxy laminates
- Polyimide GI
- Teflon,Duroid,Arlon,Taconic,Roger’s
- HTE copper
- TMM3,TMM6,TMM10 Ceramic
- Alclad
- R5880,R5870,R6002,R3003
- FR-4,Tg170,Tg180, ISOLA IS680, IS410,IS480,370HR
- Kapton
Multilayer
- 8 plus layers, average layer count 4-8 layers.
- Fine line to .004″ & thin core, utilizing vacuum press
- lamination 24 x 24 platens Multiline post-etch punch tooling system Controlled impedance.
- In-house engineering support for design and TDR
- verification Access to Gerber Automated Optical
- Inspection ATE for shorts and opens
Drilling
- Process standard hole diameters of 6:1 aspect ratio
- Smaller hole diameters of more than 4:1 aspect ratio
- Blind and buried via capability
Surface Finishes
- Tin/Lead HASL OR Led Free HAL(RoHS)
- Tin-Nickel Nickel-Gold tab and full panel, Soft Wire Bond Gold
- Silver/Palladium ,White Tin
- Electroless Ni-Immersion Gold (ENIG)
- Solder Mask Over Bare Copper (SMOBC)
- with Hot Air Solder Level (HASL), Led free Solder HAL
- Selective Solder Strip
- Conductive and non conductive epoxy via fill
Circuit Traces & Spacings
- Fine Line technology to .004″.
- Fine Pitch Surface Mount Technology (SMT).
Solder Mask & Legend
- Liquid Photoimageable Soldermask.
- Various solder mask color green, blue, red, black, white & clear
- Standard screen epoxy masks.
- Silkscreen Nomenclature standard epoxy.
Electrical Testing
- Circuit-Line 100 Volt & 250 Volt Universal Grid Test System.
- Test area of 16.0″ X 22.0″ in. with 35,000 test points.
- Clamshell testing with SMT. Net list testing from Gerber Data.
- High voltage testing.
Laboratory Process Control
- Fully compliant and automated Waste Treatment System.
- Plating analysis capabilities and full service in-house lab for cross-sections, elongation and tensile strength of plated deposits, microscopic examinations
Cam/Photoplotting
- Gerber conversion with laser photoplots
- Computer Aided Manufacturing with panelization
Scoring/Web Routing
Per Spec
Delivery
- Quick Turn 24 to 48 Hours
- Standard Prototype: 5 to 15 days
- Standard Prototype: 10 to 20 days